Product comparison
AURO Grip vs overgrip: what each one actually does
Direct answer
AURO Grip and an overgrip are not the same product and are not interchangeable. AURO Grip is a reusable physical reference for the continental grip; the overgrip is a consumable wrap for tack and sweat absorption. AURO Grip sits on top of whichever overgrip is already on the handle.
Marco LucasAURO
Two different jobs
AURO Grip and AURO Overgrip solve different problems. AURO Grip is a reusable physical reference that helps you locate the continental grip. The overgrip is a consumable that wraps the handle for tack and sweat absorption, and gets replaced every few weeks.
Where each one sits
AURO Grip sits on top of the overgrip you already use — it does not replace it and does not go underneath. You keep using an overgrip for feel and grip on top of AURO Grip.
Reusable vs consumable
Auro Grip is a physical guide that helps your hand find the continental grip on a padel racket handle. An overgrip wears out with play and gets replaced; AURO Grip is installed once and stays.
When you need both
If you want the continental-grip reference and a fresh, tacky surface to hold, you use both together: AURO Grip for the reference, an overgrip on top of it for feel.
When you only need the overgrip
If your grip is already consistent and you just need to renew tack or absorption, an overgrip on its own is enough — AURO Grip is a training aid for the grip itself, not a requirement for every session.
Where the confusion between the terms comes from
Grip, overgrip and sobregrip are often used interchangeably, and shops list all of them in the same category. On top of that, rackets ship with a factory layer many people do not know is called the base grip. The result is that two people can be discussing different components while believing they mean the same thing.
What happens if you remove the base grip
Stripping the layer bonded to the handle leaves it bare and removes the damping it provides. Some players do this chasing a thinner handle, but it is a decision with consequences beyond thickness alone. If the goal is a slimmer feel, reducing the layers above is a simpler and reversible route.
How many layers is too many
There is no correct number, but there is a practical signal: once you can no longer close your hand comfortably around the handle, you have passed the useful point. Stacking layers for volume works up to a limit, beyond which it subtracts more in control and feel than it adds.
What gets renewed and what does not
The outer layer is a consumable and is replaced frequently because it is in direct contact with your hand. The base grip has a far longer life and is not part of the routine maintenance cycle. Telling the two apart avoids both over-replacing and neglecting what genuinely needs renewing.
How to tell what you currently have fitted
If you have never touched your racket's handle, you have only the factory base grip. If at some point you wrapped a tape over it, that is an overgrip. The quick check is looking for the end fastened with adhesive tape near the butt: if it is there, at least one outer layer has been added.
Why the order is not arbitrary
Each layer is designed for a specific function and a specific position in the stack. The base damps and bonds to the handle; the outer one is built for hand contact and frequent replacement. Reversing that order is not merely uncomfortable: it stops either layer doing its job properly.
What to ask for in a shop
Simply asking for a grip can get you either product, because the terms are used interchangeably. Specifying whether you want the layer bonded to the handle or the one wrapped over it and replaced often avoids the most common misunderstanding on a first purchase.
AURO
Frequently asked questions
Can I use AURO Grip without an overgrip?
Yes. AURO Grip works as a reference on its own, though most players keep an overgrip on top for feel and sweat absorption.
Does AURO Overgrip replace AURO Grip?
No. They solve different problems: the overgrip is a consumable for tack and absorption, AURO Grip is a reusable reference for the continental grip.
How often do I replace each one?
The overgrip every few weeks, depending on play frequency and sweat. AURO Grip is installed once and is not a consumable.
Is the base grip ever replaced?
It is, but far less often than the outer layer. It has a considerably longer life because it is not in direct contact with your hand and does not absorb match moisture in the same way.
Can I wrap an overgrip straight onto a bare handle?
Technically yes, but you lose the damping the base grip provides and the handle ends up noticeably thinner. It is an unusual configuration and worth trying only knowing it changes considerably more than thickness alone.
Which of the two affects how the racket feels more?
The outer layer determines the sense of grip because it is what your hand touches, while the base influences damping and overall handle volume more. You notice a change in the outer layer sooner.
Do I need both if I only play occasionally?
The base grip comes fitted from the factory, so in practice the only decision is whether you add an outer layer over it. Playing rarely it will last a while, but it is still the contact point and degrades eventually.